Yaşar University | Curriculum Vitae

Prof. (PhD) Levent Kandiller

Faculty of Engineering / Department of Industrial Engineering

Short CV

Levent Kandiller, Ph.D. - Professor of Industrial Engineering - Rector B.S. (1986) M.E.T.U. Industrial Engineering, M.S. (1989) and Ph.D. (1994) Bilkent University. T.A./R.A. (1986-1993) and Instructor (1993-1995) @ Bilkent University; Postdoc (1995-1996) and Visiting Prof. (1996-1997) @ Rutgers University, Assist. Prof (1997-1999) and Assoc. Prof. (1999-2007) @ M.E.T.U.; Professor and Dean of Faculty of Engineering -- Architecture (2007-20012) @ Çankaya University; Professor and Dean of Facuty of Engineering (2012-2015), Vice Rector (2015,2023), Rector (2023,-) @ Yasar University. [email protected]

  • Email  
  • Phone 0232-570 7100  

Education

Phd

ENDÜSTRİ MÜHENDİSLİĞİ (DR) / İHSAN DOĞRAMACI BİLKENT ÜNİVERSİTESİ
MÜHENDİSLİK VE FEN BİLİMLERİ ENSTİTÜSÜ/ENDÜSTRİ MÜHENDİSLİĞİ (DR)/
Thesis Name: Hypergraph Partitioning (1994)
Thesis Advisor: MUSTAFA AKGÜL
1989 - 1995

Master

ENDÜSTRİ MÜHENDİSLİĞİ (YL) (TEZLİ) / İHSAN DOĞRAMACI BİLKENT ÜNİVERSİTESİ
MÜHENDİSLİK VE FEN BİLİMLERİ ENSTİTÜSÜ/ENDÜSTRİ MÜHENDİSLİĞİ (YL) (TEZLİ)/
Thesis Name: Cell Formation (1989)
Thesis Advisor: Levent Onur
1986 - 1989

Bachelor

ENDÜSTRİ MÜHENDİSLİĞİ BÖLÜMÜ / ORTA DOĞU TEKNİK ÜNİVERSİTESİ
MÜHENDİSLİK FAKÜLTESİ/ENDÜSTRİ MÜHENDİSLİĞİ BÖLÜMÜ/ENDÜSTRİ MÜHENDİSLİĞİ PR. (İNGİLİZCE)/
MÜHENDİSLİK FAKÜLTESİ
1981 - 1986

Academic Titles

Prof.

YAŞAR ÜNİVERSİTESİ / MÜHENDİSLİK FAKÜLTESİ / ENDÜSTRİ MÜHENDİSLİĞİ BÖLÜMÜ
2012 -

Prof.

ÇANKAYA ÜNİVERSİTESİ / MÜHENDİSLİK FAKÜLTESİ / ENDÜSTRİ MÜHENDİSLİĞİ BÖLÜMÜ
2007 - 2012

Assoc.Prof.

ORTA DOĞU TEKNİK ÜNİVERSİTESİ / MÜHENDİSLİK FAKÜLTESİ / ENDÜSTRİ MÜHENDİSLİĞİ BÖLÜMÜ
1999 - 2007

Asst.Prof.

ORTA DOĞU TEKNİK ÜNİVERSİTESİ / MÜHENDİSLİK FAKÜLTESİ / ENDÜSTRİ MÜHENDİSLİĞİ BÖLÜMÜ
1997 - 1999

Lecturer (PhD.)

Rutgers, The State University of New Jersey Graduate School of Management / İşletme / Bilişim Sistemleri
1995 - 1997

Thesis Superviser

Master Thesis
BESTE YILDIZ A study on uniform parallel machine scheduling with sequence dependent setup times Yaşar Üniversitesi 2022
DAMLA YÜKSEL Bi-objective no-wait permutation flowshop scheduling problems Yaşar Üniversitesi 2019
HANDE ÖZTOP Vehicle and crew scheduling problem in public bus transportation Yaşar Üniversitesi 2016
BAHAR TAŞAR A multi-compartment vehicle routing problem for incompatible products Yaşar Üniversitesi 2016
NİZAMETTİN DOĞAN GÜNER Balancing and sequencing multi-zone mix model assembly lines Çankaya Üniversitesi 2013
DERYA AKBULUT An edge matching approach for two-dimensional irregular shaped cutting stock problems Çankaya Üniversitesi 2012
FUNDA KARABAK Workforce assignment in a multi-worker multi-sided mixed-model assembly line balancing problem Çankaya Üniversitesi 2012
İNCİ YÜKSEL Single shot hit probability computation for air defense based on error analysis Orta Doğu Teknik Üniversitesi 2007
MEHMET SAVAŞ ÇENGEL A case study: Improvement of component placement sequence of a turret style SMT machine Orta Doğu Teknik Üniversitesi 2007
TANER GÜLEZ Weapon-target allocation and scheduling for air defense with time varying hit probabilities Orta Doğu Teknik Üniversitesi 2007
AYÇA YETERE Part selection problem in disassembly systems Orta Doğu Teknik Üniversitesi 2006
AHMET ALBAYRAK Taktik seviyedeki kara muharebeleri için mühimmat ihtiyacının belirlenmesinde muharebe modellerinin kullanılması Kara Harp Okulu Komutanlığı 2005
UĞUR ELİİYİ Discrete-time stochastic analysis of land combat Orta Doğu Teknik Üniversitesi 2004
ONUR AKTUĞ An agent-based order review an release system in make-to-order production Orta Doğu Teknik Üniversitesi 2004
ONUR ŞEREF A Monte-Carlo simulation for land combat Orta Doğu Teknik Üniversitesi 2001
DENİZ TÜRSEL ELİİYİ A Decision support system for cell formation problem Orta Doğu Teknik Üniversitesi 2001
GÜVEN FİDAN A Decision support system for assembly line balancing Orta Doğu Teknik Üniversitesi 2001
OKTAY TÜRETKEN A Study in implementation methodologies of enterprise resource planning system Orta Doğu Teknik Üniversitesi 2001
LEVENT ARIN Assembly line balancing in an electronics company Orta Doğu Teknik Üniversitesi 1999
TEVHİDE FATMA ALTEKİN An Approach to multi-model assembly line balancing Orta Doğu Teknik Üniversitesi 1999
PhD Thesis
NAZLI KARATAŞ AYGÜN Modeling and Simulation of Turkey Breeding Systems Yaşar Üniversitesi 2023
HANDE ÖZTOP Multi-objective green hybrid flowshop scheduling problems Yaşar Üniversitesi 2020
AHMET KABARCIK Ağların hareketli yol kesici tarafından en kısa güzergãh kullanılarak kesilmesi Kara Harp Okulu Komutanlığı 2013
İPEK SEYRAN TOPAN Amfibi harekâtta yükleme bindirmenin optimizasyonu Kara Harp Okulu Komutanlığı 2012
FATMA TEVHİDE ALTEKİN Profit oriented disassembly line balancing Orta Doğu Teknik Üniversitesi 2005
NECMETTİN ÇETİN Open-pit truck/shovel haulage simulation Orta Doğu Teknik Üniversitesi 2004
ORHAN KARASAKAL Optimal air defense strategies for a naval task group Orta Doğu Teknik Üniversitesi 2004
HALUK AYGÜNEŞ Semi-dynamic modeling of tactical level land combat Orta Doğu Teknik Üniversitesi 2003

Publications

7.1 Published or Accepted to be Published in International Journals Covered by (SCI & SCI-E & SSCI & AHCI)
KARABULUT KORHAN, ÖZTOP HANDE, KIZILAY DAMLA, TAŞGETİREN MEHMET FATİH, KANDİLLER LEVENT An evolution strategy approach for the distributed permutation flowshop scheduling problem with sequence-dependent setup times Computers & Operations Research, 142(), 0-0. (SCI-Expanded) 2022
KIZILAY DAMLA, TAŞGETİREN MEHMET FATİH, KARABULUT KORHAN, Gao Liyang, KANDİLLER LEVENT An evolution strategy approach for the distributed blocking flowshop scheduling problem Computers & Industrial Engineering, 163(), 0-0. (SCI) 2022
ÖZTOP HANDE, TAŞGETİREN MEHMET FATİH, KANDİLLER LEVENT, Pan Quan-Ke Metaheuristics with restart and learning mechanisms for the no-idle flowshop scheduling problem with makespan criterion Computers & Operations Research, 138(2), 0-0. (SCI) 2022
ÖZTOP HANDE, KARABULUT KORHAN, KANDİLLER LEVENT, TAŞGETİREN MEHMET FATİH Modeling and optimization of multiple traveling salesmen problems: An evolution strategy approach Computers & Operations Research, 129(5), 0-0. (SCI) 2021
YÜKSEL DAMLA,TAŞGETİREN MEHMET FATİH,KANDİLLER LEVENT,Gao Liang An energy-efficient bi-objective no-wait permutation flowshop scheduling problem to minimize total tardiness and total energy consumption Computers & Industrial Engineering, 145(), 0-0. (SCI) 2020
ÖZTOP HANDE,TAŞGETİREN MEHMET FATİH,TÜRSEL ELİİYİ DENİZ,Pan Quanke,KANDİLLER LEVENT An energy-efficient permutation flowshop scheduling problem Expert Systems with Applications, 150(), 113279-0. (SCI-Expanded) 2020
ÖZTOP HANDE,TAŞGETİREN MEHMET FATİH,KANDİLLER LEVENT,TÜRSEL ELİİYİ DENİZ,Gao Liang Ensemble of metaheuristics for energy-efficient hybrid flowshops: Makespan versus total energy consumption Swarm and Evolutionary Computation, 54(), 100660-0. (SCI-Expanded) 2020
TAŞAR BAHAR,TÜRSEL ELİİYİ DENİZ,KANDİLLER LEVENT Vehicle Routing with Compartments Under Product Incompatibility Constraints Promet-Traffic Transportation, 31(1), 25-36. (SCI-Expanded) 2019
ÖZCAN SEL,TÜRSEL ELİİYİ DENİZ,KANDİLLER LEVENT An alternative MILP model for makespan minimization on assembly lines Optimization Letters, 11(4), 781-799. (SCI-Expanded) 2017
ÖZCAN SEL,TÜRSEL ELİİYİ DENİZ,KANDİLLER LEVENT An alternative MILP model for makespan minimization on assembly lines Optimization Letters, 11(4), 781-799. (SCI-Expanded) 2017
KANDİLLER LEVENT A Branch and Bound Algorithm for Sector Allocation of a Naval Task Group Naval Research Logistics, 58(7), 665-0. (SSCI) 2011
Karasakal, Özdemirel, Kandiller Anti Ship Missile Defense for a Naval Task Group Naval Research Logistics, 58(3), 305-0. (SSCI) 2011
Altekin, Kandiller, Özdemirel Profit oriented disassembly line balancing International Journal of Production Research, 46(10), 2675-0. (SSCI) 2008
Özdemirel, Kandiller Semi dynamic modeling of tactical level land combat Journal of Operational Research Society, 57(1), 38-0. (SSCI) 2006
KANDİLLER LEVENT A Cell Formation Algorithm Hypergraph Approximation Cut Tree EUROPEAN JOURNAL OF OPERATIONAL RESEARCH, (3), 686-0. (SCI-Expanded) 1998
KANDİLLER LEVENT Identifying the Best Manufacturing Cell International Journal of Production Research, 32(10), 2395-0. (SSCI) 1994
7.2 Published or accepted to be published in International journals covered by other indexes
ÖZTOP HANDE,ELİİYİ UĞUR,TÜRSEL ELİİYİ DENİZ,KANDİLLER LEVENT A Bus Crew Scheduling Problem with Eligibility Constraints and Time Limitations Transportation Research Procedia, 22(), 222-231. SCOPUS 2017
Eliiyi, Kandiller A Decision Support System for Cell Formation Problem Int. J. Industrial and Systems Engineering, 3(3), 348-0. Scopus, Compendex, Academic Onfile 2008
7.3 Published in CPCI-S or CPCI-SSH indexed conference proceedings International
Shen Liangshan,TAŞGETİREN MEHMET FATİH,ÖZTOP HANDE,KANDİLLER LEVENT,Gao Liang A General Variable Neighborhood Search for the NoIdle Flowshop Scheduling Problem with Makespan Criterion 2019 IEEE Symposium Series on Computational Intelligence (SSCI) 2019
Akçay Pelin, Çetin Mustafa Doğa, Ekmekçi Batu, Yıldız Beste, KANDİLLER LEVENT, KIZILAY DAMLA Scheduling of Test Operations at Bosch Thermotechnology R&D Laboratory International Symposium for Production Research 2019 (ISPR2019) 2019
ACAR ESİN,GÖKÇE ŞEYMA DEMİR,TEMİZCERİ FATMA TALYA Design of a Decision Support System (DSS) for Housekeeping Operations International Symposium for Production Research 2018 (ISPR 2018) 2018
ÖZTOP HANDE,ELİİYİ UĞUR,TÜRSEL ELİİYİ DENİZ,KANDİLLER LEVENT A Sequential Approach for Vehicle and Crew Scheduling Problem in Public Bus Transportation OR 2016 Annual International Conference of the German Operations Research Society 2016
ÖZCAN SEL,TÜRSEL ELİİYİ DENİZ,KANDİLLER LEVENT A novel MILP formulation and bounds for the makespan minimization problem on assembly lines 4th International Symposium on Combinatorial Optimization 2016
KANDİLLER LEVENT,TAŞAR BAHAR,TÜRSEL ELİİYİ DENİZ A Multi-compartment Vehicle Routing Problem for Livestock Feed Distribution OR 2015, International Conference on Operations Research 2015
Gemici S, Otuzbir Emine, Koçyiğit Aleyna, Pekelli S, Tüzmen F, ÖZTOP HANDE, KANDİLLER LEVENT A Multi-sided and Multi-model Assembly Line Balancing Problem Digital Conversion on the Way to Industry 4.0. ISPR 2020 2020
Shen L, TAŞGETİREN MEHMET FATİH, ÖZTOP HANDE, KANDİLLER LEVENT, Gao Liyang A General Variable Neighborhood Search for the No-Idle Flowshop Scheduling Problem with Makespan Criterion 2019 IEEE Symposium Series on Computational Intelligence 1019
KIZILAY DAMLA, TAŞGETİREN MEHMET FATİH, ÖZTOP HANDE, KANDİLLER LEVENT, Suganthan PN A Differential Evolution Algorithm with Q-Learning for Solving Engineering Design Problems 2020 IEEE Congress on Evolutionary Computation, CEC 2020 2020
ÖZTOP HANDE, TAŞGETİREN MEHMET FATİH, KANDİLLER LEVENT, Pan Quan-Ke A Novel General Variable Neighborhood Search through Q-Learning for No-Idle Flowshop Scheduling 2020 IEEE Congress on Evolutionary Computation, CEC 2020 2020
YÜKSEL DAMLA, TAŞGETİREN MEHMET FATİH, KANDİLLER LEVENT, Pan Quan-Ke Metaheuristics for Energy-Efficient No-Wait Flowshops: A Trade-off between Makespan and Total Energy Consumption 2020 IEEE Congress on Evolutionary Computation, CEC 2020 2020
YÜKSEL DAMLA, KANDİLLER LEVENT, TAŞGETİREN MEHMET FATİH Intelligent Valid Inequalities for No-Wait Permutation Flowshop Scheduling Problems. INFUS 2022 2022
Çataluğ B, Çorapçı S, KANDİLLER LEVENT, Keremit Fatih, Kırbaş G, Ölteş Özge, Tuzcu H, YÜKSEL DAMLA A Discrete-Time Resource Allocated Project Scheduling Model ISPR 2021 2021
Yıldız B, KANDİLLER LEVENT, TOY AYHAN ÖZGÜR Uniform Parallel Machine Scheduling with Sequence Dependent Setup Times: A Randomized Heuristic ISPR 2021 2021
Özen Z, Tengerlek B, YÜKSEL DAMLA, STAIOU EFTHYMIA, KANDİLLER LEVENT Water Resource Management Using a Multiperiod Water Pricing Model in Izmir District ISPR 2021 2021
7.4 Books & Book Chapters International
KANDİLLER LEVENT,ÖZTOP HANDE,Özen Eda,Çini Gülce,Çınar Nilay,Soydan Hasan,Çamlıca Merve Lecture Notes in Mechanical Engineering, Proceedings of the International Symposium for Production Research 2019 Chapter:A Hybrid Flow Shop Scheduling Problem Page (636-649) Chapter Springer, Cham 2019
Akçay Pelin,Çetin M Doğa,Ekmekçi Batu,Beste Yıldız,KANDİLLER LEVENT,KIZILAY DAMLA Lecture Notes in Mechanical Engineering Chapter:Scheduling of Test Operations at Bosch Thermotechnology RD Laboratory Page (-) Chapter Springer, Cham 2019
ACAR ESİN,DEMİR GÖKÇE ŞEYMA,TEMİZCERİ FATMA TALYA,KANDİLLER LEVENT Proceedings of the International Symposium for Production Research 2018 Page (-) Springer 2018
KANDİLLER LEVENT,TÜRSEL ELİİYİ DENİZ,TAŞAR BAHAR Operations Research Proceedings 2015. Operations Research Proceedings (GOR (Gesellschaft für Operations Research e.V.)) Chapter:A Multi-compartment Vehicle Routing Problem for Livestock Feed Distribution Page (149-155) Chapter Springer 2017
KANDİLLER LEVENT Principles of Mathematics in Operations Research Page (-) Springer 2007
Kandiller, Şen, Gencel Case Fireworks Turkey Rising to the Digital Challenge Lessons from Mediterranean Enterprises Page (-) Chapter TIME Center for applied Research 2005
7.7 Other Publications
Others
KANDİLLER LEVENT İŞİM de 09 Projeler Çankaya Üniversitesi 2011
KANDİLLER LEVENT İŞİM de09 Çankaya Üniversitesi 2011
KANDİLLER LEVENT Group Technology and Cellular Manufacturing Methodologies and Applications Chapter Gordon and Breach 2010
KANDİLLER LEVENT İŞİM de 08 Projeler Çankaya Üniversitesi 2010
Non-academic Experience
Çankaya Üniversitesi Endüstri Mühendisliği Bölümü Profesör, Dekan 2007 2012
O.D.T.Ü. Endüstri Mühendisliği Bölümü Doçent 1999 2007
O.D.T.Ü. Endüstri Mühendisliği Bölümü Yardımcı Doçent 1997 1999
Rutgers Üniversitesi Yöneylem Merkezi Doktora Sonrası Araştırmacı 1995 1997
Rutgers Üniversitesi Yönetim Bilişim Sistemleri Bölümü Misafir öğretim üyesi 1996 1997
Bilkent Üniversitesi Öğretim Görevlisi 1994 1995
Bilkent Üniversitesi Araştırma Görevlisi 1986 1993
yaşar üniversitesi profesör, dekan 2012 0

Projects

RiEcoLab” Responsible Innovation-led Entrepreneurial University Transformation Centres (Ecosystem Integration Labs), EIT-HEI Initiative,

Avrupa Birliği

AgTech7: A Knowledge Alliance of Agribusinesses, Academia and Business Angels for Disruptive Farm-to-Fork Agri-Tech Training”,

Avrupa Birliği

İzmir Design Factory”, Erasmus+ KA 2:

Avrupa Birliği

DiGiYOUTH”, Erasmus+ KA 2

Avrupa Birliği

Employ: Mentoring Programme for Young People at Risk for Labour Force Entry”, Erasmus+ KA2 Strategic Partnerships”,

Avrupa Birliği

Opet Fuchs için Esnek Akış Tipi Çizelgeleme Karar Destek Sistemi (A Decision Support System for Hybrid Flow Shop Scheduling at Opet Fuchs)

Özel Kuruluşlar

Minerva Individual Innovative Entrepreneurship Programme, TÜBİTAK BİGG 1512

TÜBİTAK PROJESİ

TTO Support Programme”, TÜBİTAK 1601

TÜBİTAK PROJESİ

Istart: A Lean-Training, Innovative, Multidisciplinary Digital Entrepreneurship Platform

Avrupa Birliği

Whirlpool-Indesit Şirketinde Montaj Hattı Dengeleme Problemi (Assembly Line Balancing Problem at Whirlpool-Indesit)

Özel Kuruluşlar

Horizon 2020 Marie Sklodowska-Curie European Researchers’xx Night Project ”Science Unites All (722956)

H2020

Narkontekstil Üretim Planlama Projesi, TBTAK TEYDEB 1501

TÜBİTAK PROJESİ

İç Giyim Üretim Süreçlerinde Optimizasyon Çalışmaları Yapılarak Hücresel Üretim Yönteminin Geliştirilmesi- TEYDEB 3130425

TÜBİTAK PROJESİ

ETİ Makine Paketleme Robot Sisteminin Geliştirilmesi Projesi

TÜBİTAK PROJESİ

TR52 Konya Karaman Bölgesi 2023 Vizyon Stratejisinin Belirlenmesi Projesi, MEVKA Mevlana Kalkınma Ajansı,

Kalkınma Bakanlığı

Çok İşçili Çok Taraflı Karışık Modelli Üretim Hattı Dengelenmesi Karar Destek Sisteminin Geliştirilmesi, Ministry of Industry 00695.STZ.2010-2

Sanayi Bakanlığı (SAN-TEZ) PROJESİ

Technical Asistence For Empowering SMES For Networking and Inter-Regional Cooperation, TR07R2.02-01 of the IPA-III Regional Competitiveness Operational Programme

Diğer Resmi Kurum ve Kuruluşlar

Project Manager, Strategic Planning for Sustainable Clustering of Collaborative SMEs, LDV Multilateral Projects Transfer of Innovation, 2008-1-TR1-LEO05-03157

Avrupa Birliği

KOBİnet Establishment of Sustainable Collaborative SME Networks, LDV Multilateral Projects Transfer of Innovation, 2008-1-TR1-LEO05-03154

Avrupa Birliği

Dehos DEHOS: Deniz Harp Oyunu Simülasyon Sistemi SSM

TÜBİTAK PROJESİ

Kammos 2 Kara Kuvvetleri Mühimmat Planlama Sistemi, SSM

Diğer kamu kuruluşları (Yükseköğretim Kurumları hariç)

MedforistMedforist:Euro-Mediterranean Network for sharing IST learning resources, EUMEDIS, European Commission 5. Framework

Avrupa Birliği

Kammos 1 Kara Muharebelerinin Modellenmesi ve Simülasyonu, SSM

Diğer kamu kuruluşları (Yükseköğretim Kurumları hariç)

KOBİküme

Avrupa Birliği

Administrative Duties

Rektör Yardımcısı YAŞAR ÜNİVERSİTESİ

2015 -

Dekan YAŞAR ÜNİVERSİTESİ

2012 - 2015

Anabilim Dalı Başkanı YAŞAR ÜNİVERSİTESİ

2012 -

Enstitü Müdürü ÇANKAYA ÜNİVERSİTESİ

2008 - 2009

Bölüm Başkanı ÇANKAYA ÜNİVERSİTESİ

2007 - 2009

Dekan ÇANKAYA ÜNİVERSİTESİ

2007 - 2012

Anabilim Dalı Başkanı ORTA DOĞU TEKNİK ÜNİVERSİTESİ

2000 - 2006

Membership in Scientific and Professional Organizations

IIE

1986 - 1995

IFORS

1986 - 1995

SIAM

1988 - 1995

Yöneylem Araştırma Derneği

1986 -

Awards

25 yıl hizmet

Makina Mühendisliği Odası / TÜRKİYE
2012

Bölüm Birinciliği

ORTA DOĞU TEKNİK ÜNİVERSİTESİ / TÜRKİYE
1986

Contact

Üniversite Cad. No: 37-39 Ağaçlı Yol
Bornova / İZMİR